On this page you will find your additional instructions for the mask.
Want to know more about the use and tips of the LED face mask? Then continue below!
A short instructional video for you✨
In this video we take you through the process of applying all the accessories to the LED mask.
The remote control & explanation:
On/off Hold for 3 seconds to turn on and off
Fashion (M) Select one of the separate treatments by pressing 'M'.
Time setting (T) Press 'T' to adjust the time settings.
The simple steps
1. Remove make-up & clean your face thoroughly
2. Make sure the mask is clean (use alcohol to clean it)
3. Place the mask & choose your treatment
4. Set the time for your own treatment
5. Start your treatment
6. If necessary, use a moisturizer after the treatment for best results.
Your unique treatment begins
Intensity Press + or - to increase or decrease the intensity
To upload The remote control indicates when charging is required
Usage It is recommended to use the mask 3-4 times a week
Eye protection:
To help you, we have a few steps to make it easier;
1. Fold the ends of the eye protection slightly So that they rest more softly on your nose and exert less pressure.
2. Place the eye protectors on your nose first Before fully donning the mask. This helps position them comfortably.
3. Adjust the tires: Make sure the headbands aren't too tight. Try adjusting them higher or lower to reduce pressure on the bridge of your nose.
4. Tilt slightly : Some users find it helpful to tilt the mask slightly so that it presses less directly on their nose, as long as the light still reaches your skin well.
Personalize & enjoy ✨
Connect the mask to the top of theSmart Remote Pad Remote Control.